Module one: Evaluation and other bits

Evaluation of completed work

How do you feel about the resulting conclusion?

On the whole I am very pleased with the result of my resolved sample (see image below). I am glad that I added the subtle additional motif in the top left section of the sample (as discussed in chapter 11) as it takes away the full force of the light green fabric in the centre motif. This was however very difficult to stitch due to all the layers it need to go through- I had been aware that this would be an issue which was why the rest of the sample had been stitched using the machine. The machine was also chosen though as it offered a cross style stitch that reflected the theme and broke down the crispness of the fabric edges to add to the disintegration effects.

I feel that layering the sample up piece by piece has added dimensions and to some extent a '3D' quality the the overall look of it. What cannot be appreciated in the photo is the textural nature of the work, especially the contrasts between the frayed chenille cut away applique and the shiny satin fabrics it is next to. Also difficult to see in the photo is the complex surface of the bonded fabrics I created. These have a variety of thread, Angelina fibres and even sweet wrapper chippings trapped onto them and can reflect the light when viewed from different angles.

There are minor points that I am a little disappointed with such as I feel the red satin is probably too contrasting and highlights the centre applique piece too boldly. I also wish I had made more of the chenille cut away applique as not only did I enjoy this technique the most I feel that the texture it gives is the most successful part of the sample in my own personal opinion.

I am however particularly pleased that I made the choice to use fabric that I had printed as the printing has broken up the shine and colour of the green satin fabric is is placed onto.



1/evaluation/1: Resolved sample

Is it fit for purpose?

I believe on the whole it is for the following reasons:

• I kept to my strict colour scheme of shades of red and green.
• I used techniques that had been covered in the module that I felt would lend themselves well to the growth and disintegration theme.
• Embroidery was used to embellish the sample and I feel it has enhanced the patterns within it.
• The motif shapes were developed throughout the project and their links can be seen throughout all the chapters from research through to developing ideas for the final piece.
• The finished sample meets the size specification of 20cm x 20cm.
• Growth has been indicated through the repeat of the motif and the contouring with stitchery.
• Disintegration has been achieved through the business of the background which helps the top applique start to blend in, the cross stitch, the layering (especially of the smaller motifs on top- in particular the fibre paper), the frayed fabric edges of the chenille effect cut away applique and also with the use of the threads trapped in the bonded fabrics which have helped break up the solidness of the base colour and surface texture they are bonded to.

If you were to make it again what changes would you make to the way you designed it and the way you made it?

As previously mentioned I would not have chosen to use the strong red satin fabric as it is too bold and contrast too much against the green. Looking at the finished sample I feel with hindsight I should have gone with a dark green or at least have broken up the strength of the red with some stitchery.

Although I tested out various scenarios for the layout using my coloured papers I feel maybe I should have produced some thumbnail sketches as well to consider a wider range of possibilities. Although the layout works, I feel maybe I could have challenged myself to have created something a little more unexpected/obvious. I liked the use of scale change so maybe I could have played more on this concept.

As previously mentioned I feel I should have made more of the chenille cut away applique technique as this gave a great effect for the disintegration in the corners of the design.

I would have liked to have added more hand embroidery but the way the sample was assembled in thick layers this was very difficult to execute in the small area it was done in. If I was to do this sample again I would maybe consider adding it to layers before they are fixed down to the backing to avoid this thickness issue.


Authentication of work

The following photograph shows me working on my resolved sample for this module:



1/evaluation/2: Photograph of me (Katie Green) working on module one/resolved sample

Health and Safety rules observed

The following shows the risk assessment that I produced for this module:



1/evaluation/3: Risk assessment

Costs

The following shows the costs for making my resolved sample. Please note that the majority of the fabrics and components used were given to me for free or were recycled from old clothes and projects. If I had to buy them myself I doubt I would have needed to have spend more than £3 or £4 as the quantities were very small and I did not use anything of a particularly specialist or high quality nature.



1/evaluation/4: costs

Time sheet

The following shows my time record for the whole of module one. At the very start of the project I set this up in an Excel spreadsheet and updated it after each key piece of work listed (I broke each chapter down into sub-sections to make this easier). It was interesting to compare my time estimates to the actual time taken. In some circumstances I over or under estimated the time quite a bit! I learnt a lot from this exercise and hope it has given me the insight to be a little more accurate with my predictions. Overall however I only ran over my estimated time for the project by five and a half hours which in the scheme of things could have been much worse.

The one aspect I did not allocate time to that I will need to consider in the future is the time needed to blog the chapters. I think that realistically I need to allow an hour per chapter for this. As I have gone through the project I have found blogging easier and therefore quicker but initially I did waste a bit of time sussing it all out. It is a shame that Windows Live writer is not compatible with my laptop as I believe that might have made things easier in the long run.

I fell behind schedule mid way through due to unexpected illness and work load from my day job as a teacher. That said, I was able to successfully catch up and meet my deadline for the end of the module.

I also learnt a lot about how I work. My most successful work was conducted at weekends as I could dedicate blocks of time to it and was not tired from work- I found the evenings particularly challenging because of this. As a teacher I am blessed to have holidays in which I can also spend quality time on my work. I also found that I could fit in some of the course at school where I had easy access to dyes and equipment that benefited my project.



1/evaluation/5: Time sheet

Final Comment

I have really enjoyed this module. Although the majority of techniques introduced were not exactly new to me with my previous background in Textiles it was really good to be reaquainted with them and be able to apply them all to a specific theme. This project has served me well to get myself re-inspired and back into some good work habits too. I am really looking forward to what the next project will bring.

Module one, chapter twelve.

For this Chapter I was required to study three artists:

1. Herta Puls
2. Kandinsky
3. Someone of my own choice:

I decided to investigate the work of the Textiles and Fashion designer Zandra Rhodes.

I have always been a fan of the work of Zandra Rhodes and knew that among her vast catalogue of print designs she had produced patterns that used star motifs.

By chance, as I was investigating her further, I came across a book cover design that from a distance looked like a cross pattern. This meant that my study of her actually ticked two out of the three options to focus on!

For my studies I mainly used the internet to research these artists/designers however I was also lucky enough to already have access to a copy of Herta Puls book 'The Art of Cutwork and Applique' which gave me a great starting point to finding out what Mola embroidery was all about.

The most interesting thing about conducting these studies was that I wished I had investigated these artists at the start of the project rather than at the end of it as the module exercises directed me to. I feel that if I had looked at the ideas the work of these artists have given me as I was researching and developing my own thoughts that I might have taken influence from them and incorporated this inspiration in my own work. For example, I might have made more of the contouring aspects of the cut away applique that the Mola embroidery has to offer or I might have applied more consideration to the layout of my resolved sample so that it was more in a Kandinsky style. That said I can maybe use these influences in future modules and I will certainly be more aware of the potential for ideas that other artists and designers can offer when looking for inspiration when researching for future projects.

Please see below for my response to the studies.




1/12/1: Study of Herta Puls and Mola embroidery



1/12/2: Study of Kandinsky



1/12/3: Study of my chosen artist: Zandra Rhodes

 

 

 

 

 

 

 

 

 

 

 

 





Module one, chapter eleven

Chapter Eleven:

Resolved sample - Growth and disintegration

First thoughts: Paper experiments

The following images show my experiments with paper to try out a variety of ways of disintegrating the sheets leading to different effects and levels of this disintegration.

1/11/1: Paper experiments sheet one

1/11/2: Paper experiments sheet two

Second thoughts: Paper shapes

Not surprisingly, the more I cut the shape the trickier it became to reassemble! The colour of the background helped break up the shape giving the illusion of disintegration.



1/11/3: Paper shapes

Third Thoughts: disintegrating fabric squares

The following two images show the completion of various exercises to disintegrate a piece of fabric. The main technique used was to fray the fabric however this very quickly left me with numb fingers! I soon found an alternative and quicker way to do this with a small pair of embroidery scissors.

1/11/4: fabric disintegration experiments sheet one

1/11/5: fabric disintegration experiments sheet two

Different ways of making a shape disintegrate/grow using stitchery

The first set of samples (left column in the following image) show my attempt at making one of my shapes thinner/smaller through reverse applique and contour stitching. The second set of images show my experiments with various forms of stitching to break up the green motif so that it has the optical illusion of disintegrating into the red background fabric.

1/11/6: samples to play with growth and disintegration effects

Growth through repeat

1/11/7: Making shape from several smaller shapes

1/11/8: Shape repeated on a larger scale

1/11/9: Shape repeated into a half drop pattern

1/11/10: Scale change repeat

1/11/11: Shape repeated to form another star (note incidental star in negative space)

1/11/12: Overlapped repeat to form asymmetric star

1/11/13: Small scale repeated over large version of motif to form a new star shape

Planning the resolved sample

The following image shows the working sheet to collate together the ideas for the motif, colours and materials.

1/11/14: Planning the resolved sample in terms of motif, colour and materials

The following images show possible layouts for the resolved sample using coloured papers.

1/11/15: Planning layout #A

1/11/16: Planning the layout #B

1/11/17: Formulating the background on the resolved sample. Note addition of stitching (right)

The resolved sample

Once the background of felt bonded fabrics cut to shape was fixed in place with Bondaweb, the next stage was to create the main centre motif. Shiny green fabric was printed using the original stamp into a pattern that reflected the original motif that had been developed. A layer of printed net (printed in a different pattern to add contrast) was placed over. A layer of red satin was put underneath all these layers with several layers of chiffon and organza under that. Reverse applique was used using machine embroidery (satin stitch and a machine cross stitch pattern). This embroidery followed the original shape inside and out to give a feeling of growth. The print and netting at this stage giving an impression of disintegration. The chenille cut away applique method was used for the organza/chiffon layers and deliberately frayed for further effect. Note that on the actual sample this appears very textured but the photo does not do this justice unfortunately. A small version of the motif was then cut from a decorative bonded felt and then stitched in place using the cross stitch. This was applied so that the stitching went onto the layers underneath as well as on the bonded fabric to try and break up the outline and blend the shape into the background.

This was all that I had planned to do with the sample but I wasn't satisfied as the green motif just contrasted to much with the red. To combat this I then added a fibre paper shape and appliqued it on with a simple hand embroidered running stitch. This was a very subtle addition but it went a long way to 'kill' the overpowering green. This was challenging to sew on as by that stage there were numerous layers to penetrate the needle through. The top image that follows shows what the sample looked like before this final addition. The bottom image shows the finished resolved sample for this module.

1/11/18: Resolved sample before final embellishment added 

1/11/19: Resolved sample

Module one, Composite sheet

Consolidation of ideas....

The following image summarises for me the key research and samples that have inspired me the most as I have progressed from chapter one through to ten. The purpose of this sheet was to help inform my final resolved sample.

1/CS/1: Composite sheet to consolidate ideas so far.

Module one, chapter ten

To get started with this topic on Inlay Applique I first created an insertion stitch sample from a decorated felt bonded fabric cut up and reconstructed to test a variety of hand and machine embroidery stitches. The photo below shows the results of this along with my accompanying sketch book notes. I found the plaited insertion stitch the most challenging as there seemed to be very little in any of my embroidery books or online that showed you visually how to work it in a clear to follow way. The hand embroidery stitch that I enjoyed the most was the laced insertion stitch as although it was not the quickest nor the easiest one to complete it was the most therapeutic! I found that the hand embroidery stitches tended to look best when there was a visible gap between the fabric pieces while the machine stitches naturally pulled the fabrics together.



1/10/1, Insertion stitch sample

The following photo shows my first interchange sample at the top: 'simple counter-change sample 1'. For this sample I used two different bonded felt fabrics (that contrasted with each other) and used the laced insertion stitch to combine them together with the star motif cut and swapped between them. The outside edges have been finished with blanket stitch.

The sample displayed underneath is my counter-change sample 2. This is similar to the first sample however uses four different samples counter-changed between themselves with the motif in the centre. This sample also features an additional mini counter-change in the middle. Once again the fabrics have been joined using the laced insertion stitch but the motif has been joined using a 'cross' machine stitch. Before starting this sample I planned this idea out carefully by trying out the various possible combinations first. The photo that follows shows my working sheet for this along with the planning for interchange sample 3.



1/10/2: Counter-change samples 1 and 2



1/10/3: Working sheet for interchange samples 2 and 3

My final interchange sample shows four different squares of decorative bonded felt fabrics. As you can see from my working sheet I decided to rotate the designs to add another dimension of interest. This time as well as the motifs the squares were attached using the cross machine stitch and further embellishments were made with hand embroidery afterwards. I was very pleased with the overall effect- it is interesting that the sample looks far more complex than it was to produce. I feel that part of the success of the sample however was down to the various contrasts in textures and colours.




1/10/4: Interchange sample 3

Module one, chapter nine

An exploration of different reverse applique techniques.

Sample one: Traditional reverse applique

I did not enjoy this technique so much, maybe because I produced this sample when I was ill, maybe because the shape I chose to use wasn't as effective as I hoped it would be!

1/9/1: sample one, traditional reverse applique

Samples two and three: Contemporary reverse applique samples.

For these and the other samples I chose to switch to another shape as I felt the one that I chose for sample one was not quite right for the effects I wanted to create. The shape I went with however did retain an essence of the shape in sample one so all samples do still feel like they are part of the same collection.

Sample two (left)= outside in, sample three (right) = inside out. Both use the same fabric layers to start with. Sample two gives a great sense of depth whereas sample three protrudes outwards. It is amazing how the same layers, colours and shapes can be so different depending on the order of cutting!

1/9/2: samples two and three, contemporary reverse applique

Sample four is of chenille / slashed reverse applique.

Until this course I had not heard of this method but it has now become one of my favourite techniques ever! I love the textured effect it gives and I can see all sorts of future possibilities with my work if I was to do this technique again. It is a real shame that I have been unable to take a photo that really does this sample any justice as the texture that makes it work appears to be bleached out somewhat, although interesting to note that the print on the top layer of fabric is more obvious on the picture than it is on the actual sample.


1/9/3: sample four, chenille / slashed applique

Sample five is a multi-coloured ripple effect reverse applique.

This sample appears to have the best of both worlds of depth and 3D effects that were seen in samples two and three. I was quite experimental here and layed out the colours in a random way before sewing. To develop this kind of sample further more could be done to plan out what colour goes where in advance. It would also be interesting to try out this technique with other stitches such as satin stitch or a decorative machine stitch- I will bear this in mind if I chose to use this sample on my resolved piece.



1/9/4:sample five, multi-coloured ripple effect reverse applique

Module one, Chapter Eight

This chapter demanded more complex samples using padding and stitching instead of fabric. I identified that in order to make this work I would need to map out each of the layers in advance: the image below shows this planning alongside a small thumbnail image of the final samples.



1/8/1: Planning the layers

The following images show my final six samples. I found that the padding adding some interesting three-dimensional effects that I have been unable to showcase as effectively in photographing them. Sample five is a good example where the picture does not do the padding justice. My favourite sample was number two- I loved the way the minimal contrast actually lended more interest to the design with the subtle differences in the shades of red used. This also gave more emphasis to the padded middle which has been highlighted with the only colour contrast in green thread. Sample six: if I was to do this one again I would probably take the 'less is more' approach as I feel that the colour combinations along with the layer combinations are overkill and that the printing distracts from the main shapes (whereas I personally feel the printing complements the design in sample three) . Maybe this one would have worked better if I had stuck with red on red like I did with sample two.

Once again please note that my images appear faded in contrast with the actual colours of the samples. I have tried taking more photos but cannot seem to get the colour balance to reflect real life.



1/8/2: sample one



1/8/3: sample two

1/8/4: sample three

1/8/5: sample four

1/8/6: sample five

1/8/7: sample six

Module one, Chapter seven

To start this chapter, which is all about translating layered designs into embroidery, I produced a stitch sampler featuring a mixture of hand a machine embroidery. Seeing the stitches presented in this way was very useful later on when deciding on the most appropriate approach for my chapter main samples. I am lucky to have a sewing machine that has a wide variety of stitch selections but I resisted temptation in trying all of them and just chose to try ones that I thought might work well if used with the shapes I was starting to develop.



1/7/1: Stitch sampler

The next stage was to carefully plan ahead for the samples I wished to create. Up to this stage I had produced a wide variety of shapes, colour combinations and textures so it was important to think carefully about what had worked well for me so far in order to generate a successful sample. The following image shows my planning process including the documenting of each layer as I produced each sample.



1/7/2: Planning the samples

The following image presents my six samples for this chapter. The shape in the fourth sample has been repeated twice in sample five and three times in sample six. I found it fascinating how the sample shape could look so different when presented like this, especially when produced with different colour combinations. My personal favourite sample is the third one as I like the way the bonded fabric contrasts with the sheer green chiffon on top and the dark red underneath to create an illusion of depth that the other samples do not quite have. My least favourite sample is the first one as I think my hand embroidery stitches distract from rather than harmonise or accentuate the shapes. In the samples where I used the machine embroidery I was particularly taken with the fact the machine embroidery softens the edges, maybe this is an effect that I can play on more later on with the resolved sample. Please note that for some reason the photos appear slightly 'faded' in contrast with the actual samples which are much bolder and more vibrant in colour. Also to note that after the photos were taken the edges were neatened off more for a more polished finish.

1/7/3: sample one

1/7/4: sample two

1/7/5: sample three

1/7/6: sample four

1/7/6: sample five

1/7/7: sample six